The Kohla Smart Glue 135mm 4m is a transfer tape for recoating
Application examples:
Case 1: The glue is in very bad condition. Carefully remove the glue and dirt using a heat gun and a spatula.
Case 2: The fur is no longer sticky enough and the adhesive layer is low, then remove dirt as best as possible with tweezers
Instructions for recoating:
Preparation: Place the fur and the post-coating tape on a flat surface
Now glue the fur to the post-coating tape on the adhesive side.
Cut off the remaining post-coating tape along the edges of the fur. Then slowly iron the post-coating tape from front to back at 160-170°C three to four times with moderate pressure and then let it cool for about 5 minutes.
Now the adhesive should no longer form threads on the film and you can slowly peel off the recoating film from front to back.
(Translated with Google Translate)
Application examples:
Case 1: The glue is in very bad condition. Carefully remove the glue and dirt using a heat gun and a spatula.
Case 2: The fur is no longer sticky enough and the adhesive layer is low, then remove dirt as best as possible with tweezers
Instructions for recoating:
Preparation: Place the fur and the post-coating tape on a flat surface
Now glue the fur to the post-coating tape on the adhesive side.
Cut off the remaining post-coating tape along the edges of the fur. Then slowly iron the post-coating tape from front to back at 160-170°C three to four times with moderate pressure and then let it cool for about 5 minutes.
Now the adhesive should no longer form threads on the film and you can slowly peel off the recoating film from front to back.
(Translated with Google Translate)
| SportOkay.com number | 0285-10108 |
|---|---|
| Item number | 1500049 |
| Brand | Kohla |
| Product type | Other |
