While climbing, after using it about 10 times, the rear slide with the stopper fell off my new ski.
I was out in open glacier territory and luckily I had a screwdriver with me which allowed me to reassemble the binding.
Otherwise, a descent from the summit at about 2900m above sea level would not have been possible!
After the descent, the binding came out of the rail again during another small climb and fell off.
All you have to do is lightly touch the stopper on the other ski and the binding falls apart.
To reassemble, the clamping jaw must be completely loosened from the adjustment screw so that the setting plate with stopper can be reattached. This binding error is a very serious defect and in the worst case scenario can lead to a rescue from an emergency situation!
In principle, it looks as if the binding is generally faulty in this connection, which can very easily lead to failure due to the leverage effect, especially with wide skis of 120mm!

Lucas (11/06/2023), Austria
Orders: 14
Reviews: 7

Tested now only for downhill, excellent nonetheless

Luca (16/01/2023), Italy
Orders: 1
Reviews: 3

Up until now I was only used to the Dynanit for touring skis! This binding is not so easy for a woman to use at first. But the more often my wife uses it, the easier it becomes for her. She is enthusiastic about the really sophisticated design - touring binding, downhill binding... The weight is not important.

Gerhard (22/02/2021), Austria
Orders: 9
Reviews: 5

Works perfectly with touring ski boots as well as alpine ski boots.

Martin (05/01/2021), Austria
Orders: 2
Reviews: 2